Laws Of Radiant Heat Transfer Apparatus

• A
  small-scale accessory that allows experimental investigation of linear
  heat conduction and the measurement of the thermal conductivity of
  various solid conductors and insulators.


• An insulated, 25mm
  diameter brass heated section and cooling section that may be either
  clamped together, or assembled with one of four insulated intermediate
  sections or test specimens between the interfaces.


• The hot end
  uses a nominal 65W heater (operating at 240v maximum), which is fitted
  with a high temperature limit switch.  The power supplied to the heater
  is controlled and measured by the Heat Transfer Service Unit .


• The
  cold section is of identical dimensions to the hot end and is
  water-cooled. Both the heated and cooled ends are each fitted with three
  thermo couples at 15mm intervals to measure the temperature gradients
  along the bars.

Four intermediate insulated sections are supplied as follows: -

• 30mm
  long x 25mm diameter brass with two thermocouples at the same interval
  as the hot and cold sections. When clamped together the hot and cold
  sections form a uniform bar with eight equally spaced
  temperature-measuring points.


• 30mm long x 25mm diameter stainless steel section.


• 30mm long x 25mm diameter aluminium section.


• 30mm long x 13mm diameter brass section

Shipping & Installation

We dispatch Laws Of Radiant Heat Transfer Apparatus from our Ambala Cantt manufacturing facility to destinations across 90+ countries. All shipments include comprehensive documentation, technical manuals, and a Lab Instructor Guide.

• Packaging: Export-grade wooden crate with anti-corrosion lining
• Lead Time: 4-6 weeks for standard orders, customised lead time for bulk tenders
• Installation: On-site installation and commissioning by our certified engineers (optional)
• Training: Hands-on training for instructors and lab technicians provided
• Warranty: 12-month manufacturer warranty against material and workmanship defects