wave Probe System

A
simple and robust system for the measurement and recording of water
wave profiles, which uses the principle of measuring the electrical
conductivity between two parallel wires. The system is available in 1, 2
or 3 channel form and can display data by high speed recorder or input
to a data logger. Alternative lengths of probe are 300mm or 500mm.

Description of Wave Probe System:

• Each
  probe consists of a pair of stainless steel wires which dip into the
  water waves. The electrical conductivity between them is measured, and
  is linearly related to their depth of immersion hence to wave height.
  The method is free of meniscus and `wetting effects.


• The result is a system giving high dynamic accuracy over a wide range of wave heights and frequencies.


• Energization
  is conducted by means of an audio frequency drive signal which avoids
  all polarization effects at the wire interface. The signal is balanced
  relative to earth, to render the system immune to common mode voltages
  between the water and instrument earth. The frequency can be altered to
  permit two or more sensors to operate in close proximity without mutual
  interference.


• The probe consists of two 1.5mm diameter stainless
  steel wires spaced 12.5mm apart and 300mm long or 500mm long as
  required. Each probe is connected to its own wave monitor module in the
  electronic console by a twin core flexible cable 10m long. The distance
  between the console and probe may be increased up to 100m using commonly
  available low current cables.


• The power supply module and
  appropriate number of wave monitor modules are mounted in a console,
  finished in matte textured blue paint and fitted with four rubber feet
  and carrying handle.

 Features of Wave Probe System:

• Easily set up and calibrated


• High dynamic accuracy


• Linear calibration over a large range


• Outputs for high speed recorders and data loggers


• Can be operated at different energization frequencies to avoid mutual interaction between two or more closely spaced probes

Shipping & Installation

We dispatch wave Probe System from our Ambala Cantt manufacturing facility to destinations across 90+ countries. All shipments include comprehensive documentation, technical manuals, and a Lab Instructor Guide.

• Packaging: Export-grade wooden crate with anti-corrosion lining
• Lead Time: 4-6 weeks for standard orders, customised lead time for bulk tenders
• Installation: On-site installation and commissioning by our certified engineers (optional)
• Training: Hands-on training for instructors and lab technicians provided
• Warranty: 12-month manufacturer warranty against material and workmanship defects