Sediment Transport Demonstration Channel

Specification of Sediment Transport Demonstration Channel

• A
  transparent, inclinable flow channel through which water can be
  re-circulated by a pump over a mobile bed to demonstrate the whole range
  of bedforms from incipient particle movement to bed wash-out.


• Three different discharge rates can be selected (and measured) within the range 0.2 to 0.6 litres/sec.


• The channel slope can be adjusted within the range 0-10%.


• The working section of the channel is 1.55m long, 78mm wide and 110mm deep.


• The equipment is self-contained and may be bench-mounted in either the classroom or laboratory by virtue of its portability.


• A model undershot weir and bridge pier are included for local erosion demonstrations.


• A water level gauge is supplied to calibrate the overshot weir.

Description of Sediment Transport Demonstration Channel

The
unit consists of an inclinable channel mounted on a frame, together
with a discharge tank and recirculating pump. To commence a
demonstration, sand is placed evenly along the channel bed, between the
inlet tank and the overfall discharge weir. Water is circulated around
the system at one of the three selectable flow rates. The channel slope
is adjusted by means of a fine screw jack to which an accurate slope
indicator is attached. The channel sides are transparent in order that
bed profile changes can be observed, and a section of one side is
provided with graphical grid markings to permit quantitative assessments
to be made of bedform dynamics.

Technical Specification of Sediment Transport Demonstration Channel

• Channel working section:


• Length: 1.55m


• Width: 0.78m


• Depth: 0.11m


• Discharge rate:


• Three fixed flow rates between 0.2 and 0.6 litres /sec, selected by switch on pump


• Slope: 0 to 10%


• Sediment diameter: 0.1 to 0.3mm

Shipping & Installation

We dispatch Sediment Transport Demonstration Channel from our Ambala Cantt manufacturing facility to destinations across 90+ countries. All shipments include comprehensive documentation, technical manuals, and a Lab Instructor Guide.

• Packaging: Export-grade wooden crate with anti-corrosion lining
• Lead Time: 4-6 weeks for standard orders, customised lead time for bulk tenders
• Installation: On-site installation and commissioning by our certified engineers (optional)
• Training: Hands-on training for instructors and lab technicians provided
• Warranty: 12-month manufacturer warranty against material and workmanship defects