Motor Control Using Manual switching and Contactor circuits Training System

Motor Control Using Manual switching and Contactor circuits Training System

Motor Control Using Manual switching and Contactor circuits Training System

Lab Catalog Supply Code: NHM-16-06-0059

Motor Control Using Manual switching and Contactor circuits Training System
The System Should Cover the Following Training Contents (like or better than):
•    On-off switch
•    Manual Star-delta switch
•    Manual Star-delta reversing switch
•    Pole changing switch (Dahlander)
•    Pole changing switch (2 separate windings)
•    Motor protection circuit breaker
•    Contactor circuit with latching relay
•    Contactor circuit with latching relay & fault indication
•    Contactor circuit with latched fault indication
•    Contactor circuit with time-delay relay (delayed drop out)
•    Contactor circuit with time-delay relay (delayed pull on)
•    Pulsed contactor circuit
•    Reversing contactor control with contactor interlock
•    Reversing contactor control with contactor and button interlock
•    Limit control with mechanical end-limit and reversing switches
•    Manual Star-delta circuit
•    Automatic star-delta circuit
•    Automatic star-delta reversing circuit
•    Pole changing circuit for two speeds (Dahlander)
Pole changing circuit for two speeds (motor with two isolated windings)
Each System Comprising the following:
•    Motor protection switch, 0.7...1A
•    Motor protection switch, 1.4...2A
•    3x Latched push-button switches, 1 NO/1 NC
•    3x Latched push-button switches, 1 NO/1 NC, with red indicator lamp
•    Set of three indicator lamps, green
•    4x Main contactors, 4-pole
•    2x Auxiliary contactors, 2 NO/2 NC
•    2x Auxiliary contactor block, 2 NO/2 NC
•    Remote pulse switch, 1 change-over contact
•    Time-delay relay, delayed drop-out, 1.5....30s
Time-delay relay, delayed pull-on, 1.5....30s
Motor Control Using Manual switching and Contactor circuits Training System Operation Manual, Lab Instructor Guide and Student Workbook. Motor Control Using Manual switching and Contactor circuits Training System for Educational Vocational, Didactic Technical Training Equipment Labs.

Add to Cart