Lab Catalog Supply Code: EEH0015
Flow Level Pressure Temperature Control Bench
Flow Level And Level Flow Cascade Control Bench Manufacturer
Two vats in altuglas.
A feeding tank in transparent PVC.
Coiled circuit to create a delay.
A turbine flowmetery.
A rotameter for comparison of the flow measurements on feeding.
A rotameter for the disturbance, calibrated of the flow.
A pneumatic control valve, Kv = 2,5.
An IP converter.
A pressure regulator.
Two pressure sensors for the level measurement, situated under the 2 vats in altuglas.
Two manual needle valves.
A stainless steel centrifugal pump.
A master controller.
A slave controller.
Display of the measurement and the set point for the two controllers.
Painted steel control cabinet including :
The padlock main switch,
The ON light,
The restart button,
The emergency stop button,
The 2 controllers,
A 4 positions switch for the choice of:
The 1st range level process control
The 2nd range level process control
The flow process control
The cascade process control.
Safety connector 0-10 V for input/output of the controllers.
The control and the safety device of the pump.
Option 1 : Data acquisition module ref MAC2 composed with :
A converter RS485/RS232 or USB.
A data acquisition software under Windows allowing.
Reading PID parameters.
The drawing of the curves.
The remote control of the regulator parameters.
The storage of the values.
Power supply : 380 V three phases – 50 Hz – 0.37 kW (other voltages on inquiry).
Compressed Air supply: 6 NL/h – 6 bars (not supply as standard).
Dimensions and weight
1500 x 600 x 2100 mm
Flow Level Pressure Temperature Control Bench Operation Manual, Lab Instructor Guide and Student Workbook. Flow Level Pressure Temperature Control Bench for Educational Vocational, Didactic Technical Training Equipment Labs.