Click to enlarge
Made in India
Lab Catalog Code: ELECTRICLABTheory Lab000699
Cam Analysis Apparatus
Cam Analysis Apparatus Operation Manual, Lab Instructor Guide and Student Workbook included. Designed for Educational Vocational, Didactic Technical Training Equipment Labs.
- ISO Certified Manufacturing
- Bulk Tender Supply Available
- Complete Documentation Included
- Worldwide Shipping & Installation
Cam Analysis Apparatus
Cam Analysis Apparatus- Engineering Lab Training Systems Apparatus
is a motorized unit consisting of a camshaft driven by a variable speed
motor. The shaft runs in a double bearing. The free end of the camshaft
has a facility to mount the cam easily.
The
follower is properly guided in gunmetal bushes and the type of follower
can be changed according to the cam under test. Graduated circular
protractor is fitted co-axial with the shaft. And a Dial Gauge fitted on
the follower shaft is used to note the follower displacement for the
angle of cam rotation. A spring is used to provide controlling force to
the follower system. Weights on the follower shaft can be adjusted as
per the requirement. An arrangement is provided to regulate the speed.
The apparatus is very useful for testing the cam performance for jump
phenomenon during operation. On this apparatus the effect of change of
inertia forces on jump action of cam-follower during operation can be
observed. It is useful for testing various cam & follower pairs.
Three cams and three followers will be supplied with the apparatus.
Theses are already hardened to reduce the wear.
SCOPE OF EXPERIMENTATION:
With the help of combination of provided cams and followers following experiments can be conducted:
To plot the n-q (Follower displacement Vs Angle of rotation) curves for different cam follower pairs
The follower bounce can be observed by using a stroboscope (Optional) & effect of follower weight on bounce can be studied.
To study the effect of follower weight on bounce.
To study the effect of spring compression on bounce.
The tests can be repeated by changing compression springs, follower weights and cam speed.
UTILITIES REQUIRED:
Electricity 0.5 kW, 220 V, Single Phase
Stroboscope (Optional).
TECHNICAL DETAILS:
Cam Shaft Material Stainless Steel
Cams Tangent, Eccentric, Circular Arc type.
Followers
Roller, Knife edge, Mushroom
Compression Spring
Provided Weights 1 kg., 500gm, 200 gm & 100gm
Motor Variable speed, ½ HP., 0-1500 RPM with speed controller
Dial Gauge Baker & Mercer/Standard Make
is a motorized unit consisting of a camshaft driven by a variable speed
motor. The shaft runs in a double bearing. The free end of the camshaft
has a facility to mount the cam easily.
The
follower is properly guided in gunmetal bushes and the type of follower
can be changed according to the cam under test. Graduated circular
protractor is fitted co-axial with the shaft. And a Dial Gauge fitted on
the follower shaft is used to note the follower displacement for the
angle of cam rotation. A spring is used to provide controlling force to
the follower system. Weights on the follower shaft can be adjusted as
per the requirement. An arrangement is provided to regulate the speed.
The apparatus is very useful for testing the cam performance for jump
phenomenon during operation. On this apparatus the effect of change of
inertia forces on jump action of cam-follower during operation can be
observed. It is useful for testing various cam & follower pairs.
Three cams and three followers will be supplied with the apparatus.
Theses are already hardened to reduce the wear.
SCOPE OF EXPERIMENTATION:
With the help of combination of provided cams and followers following experiments can be conducted:
To plot the n-q (Follower displacement Vs Angle of rotation) curves for different cam follower pairs
The follower bounce can be observed by using a stroboscope (Optional) & effect of follower weight on bounce can be studied.
To study the effect of follower weight on bounce.
To study the effect of spring compression on bounce.
The tests can be repeated by changing compression springs, follower weights and cam speed.
UTILITIES REQUIRED:
Electricity 0.5 kW, 220 V, Single Phase
Stroboscope (Optional).
TECHNICAL DETAILS:
Cam Shaft Material Stainless Steel
Cams Tangent, Eccentric, Circular Arc type.
Followers
Roller, Knife edge, Mushroom
Compression Spring
Provided Weights 1 kg., 500gm, 200 gm & 100gm
Motor Variable speed, ½ HP., 0-1500 RPM with speed controller
Dial Gauge Baker & Mercer/Standard Make
Shipping & Installation
We dispatch Cam Analysis Apparatus from our Ambala Cantt manufacturing facility to destinations across 90+ countries. All shipments include comprehensive documentation, technical manuals, and a Lab Instructor Guide.
- Packaging: Export-grade wooden crate with anti-corrosion lining
- Lead Time: 4-6 weeks for standard orders, customised lead time for bulk tenders
- Installation: On-site installation and commissioning by our certified engineers (optional)
- Training: Hands-on training for instructors and lab technicians provided
- Warranty: 12-month manufacturer warranty against material and workmanship defects
Related Theory of Machines Lab — Similar to Cam Analysis Apparatus
Browse other Theory of Machines Lab products manufactured by us in India and exported worldwide. As a leading Theory of Machines Lab manufacturer and supplier from India, we offer competitive pricing for bulk tender orders, complete tender documentation, and expert installation support across 90+ countries.
